Benchmark Drills 3.05 Metres of 57.65 g/t Gold Equivalent Within 68.58 Metres of 3.22 g/t Gold Equivalent at Cliff Creek
Edmonton – November 8, 2021 – Benchmark Metals Inc. (the "Company" or "Benchmark") (TSX-V: BNCH) (OTCQX: BNCHF) (WKN: A2JM2X) – is pleased to announce new results from infill drilling at the Cliff Creek Mid Zone, including 3.05 metres (m) core length of 56.65 grams per tonne (g/t) gold and 79.75 g/t silver or 57.65 g/t gold equivalent* (AuEq) within 68.58 m core length of 3.07 g/t gold and 11.72 g/t silver or 3.22 g/t AuEq* in drill hole 21CCRC020 (Figure 1). Infill drilling on the east side of the Cliff Creek Mid Zone has intersected near-surface high-grade and bulk-tonnage mineralization in a portion of the Mid Zone that was thought to be weakly to modestly mineralized based upon intermittently sampled historical drilling. These results have the potential to add significant, higher-grade gold and silver ounces in an updated mineral resource estimate. Benchmark’s flagship Lawyers Gold-Silver Project is located within a road accessible region of the prolific Golden Horseshoe area of north-central British Columbia, Canada.
John Williamson, CEO commented, “The Cliff Creek Mid zone is now not only expanding at depth but also to the east with higher-grade gold and silver mineralization. The new gold-silver mineralization begins near surface and was previously unrecognized in this area. This type of near surface higher-grade mineralization will have a positive impact on the Preliminary Economic Analysis (PEA) by delivering early year’s material in the production schedule. Benchmark has planned additional diamond drilling to focus on expanding this zone.”
Similar to the recently announced discovery of shallow high-grade and bulk-tonnage mineralization in the connector zone (see October 6th press release) this discovery indicates a number of advantages:
Conversion of previously modelled waste in the resource model to mineralized domains; The ability to expand the pit shells as the resource grows, and; Near surface high-grade mineralization generates flexibility and potential for higher-grade starter pits.
These new results are defining strong continuity of gold and silver mineralization over 50 metres and the system remains open along strike. A number of new drill holes have been planned to follow-up on this zone looking to extend it along strike to the northwest and southeast.
Table 1: Drill Results Summary from the Cliff Creek Mid Zone
Drillhole
FROM (m)
TO (m)
INTERVAL (m)
Au (ppm)
Ag (ppm)
AuEq (ppm)
21CCRC020
19.81
88.39
68.58
3.07
11.72
3.22
incl.
19.81
41.15
21.34
9.21
30.17
9.59
incl.
27.43
30.48
3.05
56.65
79.75
57.65
21CCRC007
4.57
91.44
86.87
0.38
10.64
0.51
incl.
6.10
18.29
12.19
1.30
37.80
1.78
21CCRC021
19.81
53.34
33.53
0.52
23.19
0.81
incl.
24.38
35.05
10.67
0.96
51.40
1.60
* Gold equivalent (AuEq) calculated using 80:1 silver to gold ratio.
** Intervals are core-length. True width is estimated between 80 to 90% of core length.
Figure 1: Cliff Creek Mid Zone plan map with drill results and existing drill collars
Quality Assurance and Control
Results from samples were analyzed at ALS Global Laboratories (Geochemistry Division) in Vancouver, Canada (an ISO/IEC 17025:2017 accredited facility). The sampling program was undertaken by Company personnel under the direction of Rob L’Heureux, P.Geol. A secure chain of custody is maintained in transporting and storing of all samples. Gold was assayed using a fire assay with atomic emission spectrometry and gravimetric finish when required (+10 g/t Au). Analysis by four acid digestion with 48 element ICP-MS analysis was conducted on all samples with silver and base metal over- limits being re-analyzed by atomic absorption or emission spectrometry. Rock chip samples from outcrop/bedrock are selective by nature and may not be representative of the mineralization hosted on the project.
The technical content of this news release has been reviewed and approved by Michael Dufresne, M.Sc, P.Geol., P.Geo., a qualified person as defined by National Instrument 43-101.
About Benchmark Metals
Benchmark Metals Inc. is a Canadian based gold and silver company advancing its 100% owned Lawyer’s Gold-Silver Project located in the prolific Golden Horseshoe of northern British Columbia, Canada. The Project consists of three mineralized deposits that remain open for expansion, in addition to +20 new target areas along the 20 kilometre trend. The Company trades on the TSX Venture Exchange in Canada, the OTCQX Best Market in the United States, and the Tradegate Exchange in Europe. Benchmark is managed by proven resource sector professionals, who have a track record of advancing exploration projects from grassroots scenarios through to production.
ON BEHALF OF THE BOARD OF DIRECTORS
s/ “John Williamson”
John Williamson, Chief Executive Officer
For further information, please contact:
Jim Greig
Email: jimg@BNCHmetals.com
Telephone: +1 604 260 6977
NEITHER TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.
This news release may contain certain “forward looking statements”. Forward-looking statements involve known and unknown risks, uncertainties, assumptions and other factors that may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. Any forward-looking statement speaks only as of the date of this news release and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise.