Max Resource Identifies 5 Drill Target Zones and Reports New Assay Results from DT-3 at URU, CESAR Project, NE Colombia
Vancouver B.C., December 8, 2021 – MAX RESOURCE CORP. (“Max” or the “Company”) (TSX.V: MXR; OTC: MXROF; Frankfurt: M1D2) is pleased to report new high-grade assay results for Drill Target 3 (DT-3) within the URU Mining Concessions, located at the wholly-owned CESAR project, Northeastern Colombia (refer to Figures 1 to 6).
To date, Max’s in-country exploration team has now identified 5 Drill Target zones (DT-1 to DT-5) along 15-kilometre of strike on the URU Mining Concessions, demonstrating impressive potential for significant size copper discoveries.
New DT-3 Assay Highlights
- 9.6% copper and 70 g/t silver over 1.0m x 1.0m panel
- 7.3% copper and 19 g/t silver over 2.0m by 1.0m panel
- 5.9% copper and 50 g/t silver over 2.0m by 1.0m panel
- 3.5% copper and 8 g/t silver over 0.7m chip channel
- 2.0% copper and 2 g/t silver over 3.0m by 2.0m panel
- 1.9% copper and 2 g/t silver over 13.0m by 1.0m panel
- 1.8% copper and 3 g/t silver 14.0m by 1.0m panel
These new URU Zone assay results extend the DT-3 high-grade zone to over 1.5-kilometres in length with highlight values ranging from 5.9% to 14.8% copper and 19 g/t to 132 g/t silver. In addition, DT-3 now totals 2.6-kilometres in length with values ranging from 1.0% to 14.8% copper from an elevation of 420m down to 700m, and open in all directions.
“The Max field teams are conducting systematic and methodical rock sampling and mapping programs to further define multiple drill targets spread along 15-kilometre of strike on the URU Mining Concessions. The goal is to maximize the success of the drill programs by pinpointing high priority targets through field exploration and the proposed LiDAR survey within each of the 5 target zones,” commented Max CEO, Brett Matich.
"These programs will be key to optimizing Max’s virgin drill program at URU, being the first significant exploration event since the discovery of Cerrejón, the largest coal mine in South America and the basis for much of the critical infrastructure in the Cesar basin," he concluded.
Figure 1. URU drill target areas (DT-1 to DT-5) over 15-km of Strike – Looking SE
Figure 2: URU location
Figure 3. URU DT-3 sample # (refer Table 1), elevations
To date, extensive rock sampling programs over the last 6-months at URU has located +1.0% copper over a vertical extent of +500m along a major regional structural corridor that connects the upper sediment-dominated part of the Cesar Basin to ther lower volcano-sedimentary portions.
The structure at URU is interpreted as being a major feeder that has shown true widths of +15m and hosts significant grades of copper-silver in breccias and fault/fracture zones that have significant vertical extents as evidenced by recent field visits and sampling along 15-kilometres of strike, elevations range between 400m and +950m RL.
Figure 4. 14.8% Cu + 132 g/t Ag over 1.5m x 0.8m (876798) Figure 5. 14.8% Cu + 132 g/t Ag over 1.0m x 1.0m (876439)
Copper (Cu)
Silver (Ag)
Width
Sample #
14.8%
132 g/t
1.5m x 0.8m Panel
876798
9.6%
70 g/t
1.0m x 1.0m Panel
876439
7.3%
19 g/t
2.0m x 1.0m Panel
876411
5.9%
50 g/t
2.0m x 1.0m Panel
876438
3.5%
8 g/t
0.7m – Chip Channel
870008
3.2%
16 g/t
0.3m – Chip Channel
418476
2.6%
8 g/t
2.0m x 0.6m - Panel
876637
2.6%
16 g/t
1.0m Chip Channel
876572
2.6%
10 g/t
0.5m Chip Channel
876605
2.5%
6 g/t
0.7m Chip Channel
870008
2.5%
4 g/t
0.2m Chip Channel
876907
2.5%
3 g/t
0.2m Chip Channel
876639
2.4%
3 g/t
0.5m Chip Channel
870017
2.4%
1 g/t
0.2m Chip Channel
876641
2.3%
3 g/t
1.0m Chip Channel
876417
2.2%
8 g/t
0.2m Chip Channel
418473
2.1%
6 g/t
1.8m Chip Channel
876574
2.1%
6 g/t
1.8m Chip Channel
876575
2.0%
g/t
3.0m x 2.0m Panel
876423
1.9%
2 g/t
13.0m x 1.0m Panel
876646
1.8%
3 g/t
14.0m x 1.0m Panel
876636
1.6%
2 g/t
1.0m Chip Channel
876611
1.6%
2 g/t
0.3m Chip Channel
876901
1.5%
1 g/t
2.0m x 1.0m Panel
876915
1.0%
g/t
0.5m Chip Channel
876421
Table 1. URU Drill Target 1, Rock assay results that returned 1.0% copper or greater. Max cautions investors that panel and representative grab sampling can be selective and are not necessarily representative of the mineralization.
QUALIFIED PERSON
The Company’s disclosure of a technical or scientific nature in this news release was reviewed and approved by Tim Henneberry, P Geo (British Columbia), a member of the Max Resource Advisory Board, who serves as a qualified person under the definition of National Instrument 43:101.
CESAR COPPER-SILVER PROJECT IN COLOMBIA – OVERVIEW
CESAR lies along the copper-silver rich 200-kilometre-long Cesar Basin in northeastern Colombia. This region provides access to major infrastructure (refer to Figure 6) resulting from oil & gas and mining operations, including Cerrejón, the largest coal mine in South America, now held by global miner Glencore.
Geologically, Max interprets the sediment-hosted stratiform copper-silver mineralization in the Cesar basin to be analogous to both the Central African Copper Belt (CACB) and the Kupferschiefer deposits in Poland. Almost 50% of the copper known to exist in sediment-hosted deposits is contained in the CACB, including Ivanhoe Mines Ltd (TSX: IVN) 95-billion-pound Kamoa-Kakula discovery in the Congo.
Kupferschiefer, the world’s largest silver producer and Europe’s largest copper source, is a mining orebody ranging from 0.5 to 5.5m thick at depths of 500m, grading 1.49% copper and 48.6 g/t silver. The silver yield is almost twice the production of the world’s second largest silver mine.
Source: Central African Belt Descriptive models, grade-tonnage relations, and databases for the assessment of sediment-hosted copper deposits with emphasis on deposits in the Central Africa Copperbelt, Democratic Republic of the Congo and Zambia by USGS 2010. Kamoa-Kakula by OreWin March 2020. World Silver Survey 2020 and Kupferschiefer Deposits & Prospects in SW Poland, September 27, 2019. Max cautions investors that the presence of copper mineralization of the Central African Copper Belt and the Polish Kupferschiefer are not necessarily indicative of similar mineralization at CESAR.
Figure 6. CESAR project’s world class infrastructure
CESAR North 90-kilometre-long-copper-silver belt:
- Max discovered AMN (previously named AM North), collectively spanning over 45-km², highlight values of 34.4% copper and 305 g/t silver. Intervals range 0.5 to 25.0m
- Max’s CONEJO discovery (March 2021) is located now spans over 3.7-km of strike with average grade of 4.9% copper using 2% lower cut. To date, 13 rock samples returned values greater than 8.0% copper; 53 returned values greater than 5.0% copper; 93 returned values 2.0% copper and above; 36 returned values greater than 20 g/t silver. Widths range from 0.5 to 20.0m. Highlight values of 12.5 % copper and 126 g/t silver:
- 12.5% copper + 84 g/t silver over 5.0m by 5.0m
- 10.5% copper + 50 g/t silver over 3.0m by 2.0 m
- 10.4% copper + 95 g/t silver over 5.0m by 5.0m
- 10.2% copper + 62 g/t silver over 5.0m by 5.0m
- 10.0% copper + 80 g/t silver over 5.0m by 5.0m
- 9.9% copper and 50 g/t silver over widths of 2.0m
- 9.3% copper and 126 g/t silver over widths of 2.0m
- The URU discovery (April 2021) is located 30-km south of CONEJO, now expanded to 48-km² and open in all directions. URU appears to have major-scale potential; Highlight values of 14.8% copper and 132 g/t silver. Widths range 1.0 to 10.0m:
- 14.8% copper and 132 g/t silver outcrop over 1.5m x 0.8m
- 6.5% copper and 6 g/t silver outcrop over widths of 1.0m
- 5.6% copper and 87 g/t silver outcrop over 1.0m by 1.0m
- 4.3% copper and 8 g/t silver outcrop over widths of 10.0m
- 3.9% copper and 7 g/t silver outcrop over widths of 10.0m
- 3.6% copper and 12 g/t silver outcrop over widths of 10.0m
- 3.0% copper and 6 g/t silver outcrop over widths of 10.0m
- 3.0% copper and 37 g/t silver outcrop over widths of 10.0m
- Recently granted four contagious Mining Concession Contracts covering 70-km² of the URU target zone (November 24, 2021, NR)
- The SP target is located within the mid portion of the CESAR North 90-km-long-copper-silver belt, reconnaissance sampling over 25.0m averaged 4.8% copper and 51 g/t silver considered to be significant (September 7, 2021, NR)
- Next Steps:
Continue the CESAR copper-silver regional exploration programs LiDAR and infill mapping and sampling of the entire 70-km² Ground IP surveys to zero in on drill targets Environmental and socio-economic surveys for drill permitting Phase one drilling of the URU delineated targets
ABOUT MAX RESOURCE CORP.
Max Resource Corp. is a copper and precious metals exploration company, engaged in advancing both the newly discovered district-scale CESAR copper-silver project (100% owned) in Colombia and the newly acquired RT Gold project (100% earn-in) in Peru. Both projects have potential for the discovery of large-scale mineral deposits; both stratiform-type copper-silver in Colombia and high-grade gold porphyry and massive sulfide in Peru.
Max Resource was awarded a Top 10 Ranked Company in the Mining Sector on the TSX Venture 50™ for 2021, achieving a market cap increase of 1,992% and a share price increase of 282% in 2020.
For more information visit: https://www.maxresource.com/
For more information visit: www.tsx.com/venture50
TSX Venture 50™ for 2021 video: MAX Resource Corp. (TSXV: MXR) - 2021 TSX Venture 50 - YouTube
For additional information contact:
Max Resource Corp.
Tim McNulty
T: (604) 290-8100
Hudes Communications International
Nelson Hudes
E: nelson@hudescommunications.com
Phone: (905) 660-9155
*The Venture 50 ranking is provided by TSX Venture Exchange Inc. (“TSXV”) for information purposes only. Neither TMX Group Limited nor any of its affiliated companies guarantees the completeness of this information and are not responsible for any errors or omissions in or any use of, or reliance on, this information. The Venture 50 program is not an invitation to purchase securities listed on TSX Venture Exchange. TSXV and its affiliates do not endorse or recommend any of the referenced securities or issuers, and this information should not be construed as providing any trading, legal, accounting, tax, investment, business, financial or other advice and should not be relied on for such purposes”
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release
Except for statements of historic fact, this news release contains certain "forward-looking information" within the meaning of applicable securities law. Forward-looking information is frequently characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate" and other similar words, or statements that certain events or conditions "may" or "will" occur. Forward-looking statements are based on the opinions and estimates at the date the statements are made and are subject to a variety of risks and uncertainties and other factors that could cause actual events or results to differ materially from those anticipated in the forward-looking statements including, but not limited to delays or uncertainties with regulatory approvals, including that of the TSXV. There are uncertainties inherent in forward-looking information, including factors beyond the Company’s control. There are no assurances that the commercialization plans for Max Resources Corp. described in this news release will come into effect on the terms or time frame described herein. The Company undertakes no obligation to update forward-looking information if circumstances or management's estimates or opinions should change except as required by law. The reader is cautioned not to place undue reliance on forward-looking statements. Additional information identifying risks and uncertainties that could affect financial results is contained in the Company’s filings with Canadian securities regulators, which filings are available at www.sedar.com