Newcore Gold Drilling Intersects 0.90 g/t Gold Over 69.0 Metres, including 2.06 g/t Gold over 12.0 Metres, at the Enchi Gold Project, Ghana

Results from 1.4 km of Step-Out Drilling on the Boin Gold Deposit;  

Drill Tested Strike Extent at Boin Extended to over Four Kilometres

 

June 1, 2021

 

Vancouver, BC – Newcore Gold Ltd. ("Newcore" or the "Company") (TSX-V: NCAU, OTCQX: NCAUF) is pleased to announce additional drill results from the 66,000 metre drill program underway at the Company’s 100% owned Enchi Gold Project ("Enchi" or the "Project") in Ghana. Drilling at the Boin Gold Deposit ("Boin") has intersected 0.90 grams per tonne gold ("g/t Au") over 69.0 metres ("m") from 55 m, including 2.06 g/t Au over 12.0 m from 61 m, and 3.50 g/t Au over 4.0 m from 39 m. These results are from a series of exploration holes, expanding the gold mineralization outside of the previously tested area by 400 metres to the north and one kilometre to the south. These results have now expanded the drill tested strike extent at Boin to over four kilometres. Boin is outlined on surface by a greater than six-kilometre-long by up to one-kilometre-wide gold in soil anomaly. Approximately 50% of the surface anomaly is untested to date. 

 

Prior to the start of the current 66,000 metre resource expansion and discovery drill program, the Enchi Gold Project hosted a pit constrained Inferred Mineral Resource of 1.22 million ounces gold (contained within 52.9 million tonnes grading 0.72 g/t Au), which includes the Boin Gold Deposit  at 533,000 ounces (contained within 19.8 million tonnes grading 0.84 g/t Au) (see Newcore news release dated September 14, 2020). The mineral resource at Boin remains open along strike and at depth.

 

Highlights from Drilling at Boin

 

-         Drilling on the northern extension of the deposit has extended the drill tested portion of the gold mineralization by 400 metres to the north:

 

Drilling intersected wide zones of mineralization including high-grade core structures and multiple sub-parallel structures within the oxide zone and upper sulphide material

 

Hole KBRC236 intersected 0.90 g/t Au over 69.0 m from 55 m to 124 m, including

 

2.06 g/t Au over 12.0 m from 61 m to 73 m (mixed oxide and sulphide zone).

 

Hole KBRC241 intersected 1.02 g/t Au over 36.0 m from 76 m to 112 m, including

 

2.58 g/t Au over 7.0 m from 95 m to 102 m (mixed oxide and sulphide zone), as well as an upper zone in the oxides grading 1.75 g/t Au over 9.0 m from 34 m to 43 m.

 

Mineralization encountered in shallow oxides, hole KBRC233 intersected 3.50 g/t Au over 4.0 m from 39 m to 43 m.

 

-         Drilling on the southern extension has extended the drill tested portion of the gold mineralization by one kilometre to the south:

 

Hole KBRC225, completed one kilometre south of the previously tested area, intersected two gold mineralized zones. Results included 1.51 g/t Au over 2.0 m from 23 m to 25 m (oxide zone) and 0.67 g/t Au over 39.0 m from 70 m to 109 m (mixed oxide and sulphide zone), including 1.60 g/t Au over 8.0 m from 95 m to 103 m (sulphide zone).

 

Hole KBRC205, completed 500 metres south of the previously tested area, intersected shallow mineralization with 0.53 g/t Au over 15.0 m from 12 m to 27 m (oxide zone).

 

Greg Smith, Vice President of Exploration of Newcore stated, "Gold mineralization has now been intersected at the Boin Gold Deposit along more than four kilometres of strike length and remains open to further expansion along strike and at depth. The 44 holes reported in this news release are exploration RC holes stepping out hundreds of metres from prior drilling, with results continuing to define a series of sub-parallel structures that include wide mineralized zones with higher-grade core structures. Deeper drilling, targeting 200 to 300 metres vertical depth, is underway targeting depth extensions of these higher-grade shoots."

 

This news release reports drill results for 44 RC holes (5,760 m) targeting the Boin Gold Deposit at Enchi, with 32 of the 44 holes intersecting gold mineralization. 

 

Select assay results from the 44 holes of the drill program reported in this release are below:

 

Table 1 - Enchi Gold Project Drill Highlights

 

Hole ID

Zone/Deposit

From (m)

To (m)

Length (m)

Au (g/t)

KBRC205

Boin (South)

12.0

27.0

15.0

0.53

including

 

13.0

16.0

3.0

1.81

KBRC206

Boin (South)

67.0

69.0

2.0

2.31

KBRC225

Boin (South)

23.0

25.0

2.0

1.51

and

 

70.0

109.0

39.0

0.67

including

 

95.0

103.0

8.0

1.60

KBRC229

Boin (South)

118.0

133.0

15.0

0.73

KBRC233

Boin (North)

39.0

43.0

4.0

3.50

KBRC234

Boin (North)

64.0

71.0

7.0

1.25

KBRC235

Boin (North)

40.0

43.0

3.0

1.45

and

 

55.0

59.0

4.0

1.29

KBRC236

Boin (North)

13.0

18.0

5.0

1.24

and

 

55.0

124.0

69.0

0.90

including

 

61.0

73.0

12.0

2.06

KBRC241

Boin (North)

18.0

26.0

8.0

0.45

and

 

34.0

43.0

9.0

1.75

and

 

62.0

65.0

3.0

1.36

and

 

76.0

112.0

36.0

1.02

including

 

95.0

102.0

7.0

2.58

KBRC244

Boin (South)

4.0

11.0

7.0

0.68

 

Notes:

 

See detailed table for complete results

 

Intervals reported are core lengths with true width estimated to be 75 - 85%

 

Length-weighted averages from uncut assays

 

A plan map showing the drill hole locations can be viewed at:

 

https://newcoregold.com/site/assets/files/5701/2021_06_01-ncau-nr-enchi-plan-map-boin-l.pdf

 

A cross section showing drill results and highlights for hole KBRC236 can be viewed at:

 

https://newcoregold.com/site/assets/files/5701/2021_06_01-ncau-crosssections-boin-l-1.pdf

 

A complete list of the 2020 - 2021 drill results to date, including hole details, can be viewed at:

 

https://newcoregold.com/site/assets/files/5701/2021_06_01-ncau-enchi-2020-2021-drill-results-l.pdf

 

Drilling at Boin North included 25 holes totalling 3,426 metres (KBRC201, KBRC210A to KBRC221, and KBRC232 to KBRC243) directed at extending the gold mineralization north of the currently drill tested area, and further testing the northern limit of the gold mineralization. 14 of the 25 holes intersected gold mineralization, including wide zones of mineralization containing high-grade core structures.

 

Drilling on the northern extension of Boin has extended the drill tested portion of the gold mineralization by 400 metres to the north. Recent drilling on the northern portion of the Boin Deposit has intersected wide zones of mineralization, including high-grade core structures and multiple sub-parallel structures within the oxide zone and upper sulphide material. Hole KBRC236 is a 50 metre step out up dip from previous drilling and intersected 0.90 g/t Au over 69.0 m from 55 m to 124 m, including 2.06 g/t Au over 12.0 m from 61 m to 73 m (mixed oxide and sulphide zone), as well as a second upper zone in the oxides of 1.24 g/t Au over 5.0 m from 13 m to 18 m. Hole KBRC241, drilled 250 metres north of KBRC236, intersected 1.02 g/t Au over 36.0 m from 76 m to 112 m, including 2.58 g/t Au over 7.0 m from 95 m to 102 m (mixed oxide and sulphide zone), and an upper zone in the oxides grading 1.75 g/t Au over 9.0 m from 34 m to 43 m. Hole KBRC233, collared near the northern edge of prior drilling, intersected 3.50 g/t Au over 4.0 m from 39 m to 43 m. Hole KBRC235, collared on the same section as KBRC233, also intersected two gold mineralized zones both in the oxide zone, 1.45 g/t Au over 3.0 m from 40 m to 43 m and 1.29 g/t Au over 4.0 m from 55 m to 59 m.

 

Drilling at Boin South included a series of 19 holes totalling 2,334 metres (KBRC202 to KBRC209, KBRC222 to KBRC231, and KBRC244) directed at extending the gold mineralization south of the currently drill tested area. 18 of the 19 holes intersected gold mineralization, including multiple intersects within the near surface oxide horizon and upper sulphides.

 

Drilling on the southern end of Boin has extended the drill tested portion of the gold mineralization by one kilometre south. Hole KBRC225, drilled one kilometre south of the previously drill tested area, intersected two gold mineralized zones: 0.67 g/t Au over 39.0 m from 70 m to 109 m (mixed oxide and sulphide zone), including 1.60 g/t Au over 8.0 m from 95 m to 103 m (sulphide zone), and 1.51 g/t Au over 2.0 m from 23 m to 25 m (oxide zone). Hole KBRC205, completed 500 metres south of the previously tested area, intersected 0.53 g/t Au over 15.0 m from 12 m to 27 m (oxide zone), including 1.81 g/t Au over 3.0 m from 13 m to 16 m (oxide zone). Hole KBRC206, completed on the same section as KBRC205, intersected the structure down dip and returned 2.31 g/t Au over 2.0 m from 67 m to 69 m (oxide zone). Hole KBRC229 is a 100 metre step out to the south and intersected 0.73 g/t Au over 15.0 m from 118 m to 133 m (sulphide zone). This first pass exploratory drilling is wide spaced with a minimum of 200 metres between sections, and further follow-up drilling is underway.

 

A total of 44,757 metres in 270 holes have been completed as part of the ongoing 2020 - 2021 drill program at Enchi. For the total planned 66,000 metre drill program, assay results have now been received and released for 246 holes representing 38,627 metres.

 

The Enchi Gold Project hosts a pit constrained Inferred Mineral Resource of 52.9 million tonnes grading 0.72 g/t Au containing 1.22 million ounces gold (see Newcore news release dated September 14, 2020). The Mineral resource estimation practices are in accordance with CIM Estimation of Mineral Resource and Mineral Reserve Best Practice Guidelines (November 29, 2019), and follow CIM Definition Standards for Mineral Resources and Mineral Reserves (May 10, 2014), that are incorporated by reference into National Instrument 43-101 ("NI 43-101"). The Mineral Resource is detailed in a technical report titled "Enchi Gold Project, Resource Update, Enchi Ghana" with an effective date of October 21, 2020, prepared by Todd McCracken and Greg Smith and filed on SEDAR at www.sedar.com.

 

2020 - 2021 Enchi Drilling Program

 

A 66,000 metre discovery and resource expansion drilling program is underway at Enchi. The program includes both RC and diamond drilling and will include the first deep drilling planned on the Project. This drill program includes testing extensions of the existing resource areas while also testing a number of high priority exploration targets outside of the Inferred Mineral Resource. Drilling is focused on step out extensions and exploration drilling at the Boin, Sewum, and Nyam Deposits. Additional drilling is planned at previously drilled zones that are outside of the resource area (Kojina Hill, Kwakyekrom and Eradi), along with first pass drilling to test a series of kilometre-scale gold-in-soil anomalous zones with no prior drilling (Nkwanta, Sewum South and other anomalies). All zones represent high priority targets based on geological, geochemical and geophysical surface work and previous trenching and drilling.

 

Boin Gold Zone

 

The Boin Gold Deposit is one of the primary deposits which comprise the pit constrained Inferred Mineral Resource Estimate at Enchi. Boin is located 15 kilometres south of the town of Enchi, with nearby roads and power and further access provided by a series of drill roads. Boin is outlined on surface by a greater than six-kilometre-long by up to one-kilometre-wide gold in soil anomaly. Approximately 50% of the surface anomaly is untested to date. An airborne geophysical anomaly coincident with the Boin structure extends for a further two kilometres north and four kilometres south beyond the limits of current drilling. As part of the current drilling program a total of 112 holes representing 16,699 metres have been completed at Boin.

 

Drill Hole Locations

 

Table 2 - Enchi Gold Project Drill Hole Location Details

 

Hole ID

UTM East

UTM North

Elevation

Azimuth °

Dip °

Length (m)

KBRC201

636042

520881

111

114

-60

180

KBRC202

632540

518142

136

114

-60

102

KBRC203

632554

518113

129

114

-60

150

KBRC204

632382

518036

121

114

-60

102

KBRC205

632397

517993

131

114

-60

132

Hole ID

UTM East

UTM North

Elevation

Azimuth °

Dip °

Length (m)

KBRC206

632416

517951

125

114

-60

168

KBRC207

632238

517815

120

114

-60

108

KBRC208

632254

517778

115

114

-60

105

KBRC209

632271

517741

115

114

-60

156

KBRC210A

637066

522086

98

114

-60

109

KBRC211

637096

522026

101

114

-60

150

KBRC212

637125

521954

99

114

-60

200

KBRC213

636897

521852

105

114

-60

108

KBRC214

636929

521774

100

114

-60

156

KBRC215

636961

521707

104

114

-60

213

KBRC216

636580

521425

116

114

-60

108

KBRC217

636604

521370

108

114

-60

150

KBRC218

636633

521309

100

114

-60

200

KBRC219

636272

521141

107

114

-60

100

KBRC220

636295

521096

107

114

-60

150

KBRC221

636315

521053

107

114

-60

216

KBRC222

631646

517464

136

114

-60

120

KBRC223

631739

517535

140

114

-60

132

KBRC224

631888

517608

113

114

-60

100

KBRC225

631888

517571

118

114

-60

100

KBRC226

632085

517690

122

114

-60

100

KBRC227

632106

517653

116

114

-60

150

KBRC228

632705

518290

125

114

-60

100

KBRC229

632729

518240

127

114

-60

150

KBRC230

632621

518218

126

114

-60

107

KBRC231

632636

518175

120

114

-60

150

KBRC232

635142

520142

138

114

-60

84

KBRC233

635156

520119

135

114

-60

126

KBRC234

635082

520035

121

114

-60

114

KBRC235

635164

520092

134

114

-60

136

KBRC236

635223

520187

125

114

-60

126

KBRC237

635295

520246

118

114

-60

100

KBRC238

635313

520218

112

114

-60

150

KBRC239

635374

520333

114

114

-60

100

KBRC240

635433

520334

110

114

-60

100

Hole ID

UTM East

UTM North

Elevation

Azimuth °

Dip °

Length (m)

KBRC241

635447

520300

129

114

-60

150

KBRC242

635548

520443

121

114

-60

100

KBRC243

635700

520612

129

114

-60

100

KBRC244

632770

518380

126

114

-60

102

 

COVID-19 Protocols

 

Newcore’s first priority is the health and safety of all employees, contractors, and local communities. The Company is following all Ghana guidelines and requirements related to COVID-19. The Company has implemented COVID-19 protocols for its ongoing drill program consisting of the mandatory use of personal protective equipment (including facemasks for all employees), maintaining social distancing, frequent hand washing, and daily temperature checks at the start of each shift.

 

Newcore Gold Best Practice

Newcore is committed to best practice standards for all exploration, sampling and drilling activities. Drilling was completed by an independent drilling firm using industry standard RC and Diamond Drill equipment. Analytical quality assurance and quality control procedures include the systematic insertion of blanks, standards and duplicates into the sample strings. Samples are placed in sealed bags and shipped directly to Intertek Labs located in Tarkwa, Ghana for 50 gram gold fire assay. 

 

Qualified Person

 

Mr. Gregory Smith, P. Geo, Vice President of Exploration of Newcore, is a Qualified Person as defined by NI 43-101, and has reviewed and approved the technical data and information contained in this news release. Mr. Smith has verified the technical and scientific data disclosed herein and has conducted appropriate verification on the underlying data including confirmation of the drillhole data files against the original drillhole logs and assay certificates.

 

About Newcore Gold Ltd.

 

Newcore Gold is advancing its Enchi Gold project located in Ghana, Africa’s largest gold producer 1. The Project currently hosts an Inferred Mineral Resource of 1.2 million ounces of gold at 0.72 g/t 2. Newcore Gold offers investors a unique combination of top-tier leadership, who are aligned with shareholders through their 32% equity ownership, and prime district scale exploration opportunities. Enchi’s 216 km2 land package covers 40 kilometres of Ghana’s prolific Bibiani Shear Zone, a gold belt which hosts several 5 million-ounce gold deposits, including Kinross’ Chirano mine 50 kilometers to the north. Newcore’s vision is to build a responsive, creative and powerful gold enterprise that maximizes returns for shareholders.

 

On Behalf of the Board of Directors of Newcore Gold Ltd.

 

Luke Alexander

President, CEO & Director

 

For further information, please contact:

Mal Karwowska | Vice President, Corporate Development and Investor Relations

+1 604 484 4399

info@newcoregold.com

www.newcoregold.com

 

1 Source: Production volumes for 2019 as sourced from the World Gold Council

 

2 Notes for Inferred Mineral Resource Estimate:

 

CIM definition standards were followed for the resource estimate.

 

The 2020 resource models used ordinary kriging (OK) grade estimation within a three-dimensional block model with mineralized zones defined by wireframed solids and constrained by whittle pits shell.

 

A base cut-off grade of 0.3 g/t Au was used with a capping of gold grades at 18 g/t.

 

A US$1,500/ounce gold price, open pit with heap leach operation was used to determine the cut-off grade of 0.3 g/t Au. Mining costs of US$2.27/mined tonne and G&A and Milling costs of US$9.84/milled tonne. The Inferred Mineral Resource Estimate is pit constrained.

 

A density of 2.45 g/cm3 was applied. Numbers may not add due to rounding.

 

Mineral Resources that are not mineral reserves do not have economic viability.

 

These numbers are from the technical report titled "Enchi Gold Project, Resource Update, Enchi, Ghana", with an effective date of October 21, 2020, prepared by Todd McCracken, P. Geo. and Greg Smith, P. Geo. in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects and is available under Newcore’s SEDAR profile at www.sedar.com.

 

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

 

Cautionary Note Regarding Forward-Looking Statements

 

This news release includes statements that contain "forward-looking information" within the meaning of the applicable Canadian securities legislation ("forward-looking statements"). All statements, other than statements of historical fact, are forward-looking statements and are based on expectations, estimates and projections as at the date of this news release. Any statement that involves discussion with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions, future events or performance (often, but not always using phrases such as "plans", "expects", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates", or "believes" or variations (including negative variations) of such words and phrases, or state that certain actions, events or results "may", "could", "would", "might" or "will" be taken, occur or be achieved) are not statements of historical fact and may be forward-looking statements. In this news release, forward-looking statements relate, among other things, to: statements about the estimation of mineral resources; results of our ongoing drill campaign, magnitude or quality of mineral deposits; anticipated advancement of mineral properties or programs; and future exploration prospects.

 

These forward-looking statements, and any assumptions upon which they are based, are made in good faith and reflect our current judgment regarding the direction of our business. The assumptions underlying the forward-looking statements are based on information currently available to Newcore. Although the forward-looking statements contained in this news release are based upon what management of Newcore believes, or believed at the time, to be reasonable assumptions, Newcore cannot assure its shareholders that actual results will be consistent with such forward-looking statements, as there may be other factors that cause results not to be as anticipated, estimated or intended.  Forward-looking information also involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by the forward-looking information. Such factors include, among others: risks related to the speculative nature of the Company’s business; the Company’s formative stage of development; the Company’s financial position; possible variations in mineralization, grade or recovery rates; actual results of current exploration activities; fluctuations in general macroeconomic conditions; fluctuations in securities markets; fluctuations in spot and forward prices of gold and other commodities; fluctuations in currency markets (such as the Canadian dollar to United States dollar exchange rate); change in national and local government, legislation, taxation, controls, regulations and political or economic developments; risks and hazards associated with the business of mineral exploration, development and mining (including environmental hazards, unusual or unexpected geological formations); the presence of laws and regulations that may impose restrictions on mining; employee relations; relationships with and claims by local communities; the speculative nature of mineral exploration and development (including the risks of obtaining necessary licenses, permits and approvals from government authorities); and title to properties.

 

Forward-looking statements contained herein are made as of the date of this news release and the Company disclaims any obligation to update any forward-looking statements, whether as a result of new information, future events or results, except as may be required by applicable securities laws. There can be no assurance that forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking information.